+81-3-3493-2037

                  8:45~17:30 (Closed on Weekends and National Holidays & during New Year's holiday)
メニュー
Japanese Site

PRODUCT LINEUP

Pump

Powered Mini-X

Powered Mini-X is the world’s smallest and lightest air-driven reciprocating pump. By directly high pressure pumping and feeding high viscosity materials such as grease, silicon, adhesives, and LIM materials from the material containers including cartridges, 1kg cans, 3-4kg cans, and 18kg cans, the remaining amount in the container can be extremely small and the material can be used up without waste.

Since it is pumped directly from the container, there is no air mixing.

If it is a material with a viscosity of 10 Pa*s or more, try a powered mini-X without hesitation.

Name ME001 / ME003 / ME004 / ME018SF / CX-600-III / CX-602-II
Pressure ratio 5×1 10×1 20×1
Discharge amount 11.0cc/cycles 6.6cc/cycles 3.2cc/cycles
Air consumption 38L/min(ANR) (0.4MPa:When operated at 50 cycles/min)
Material outlet diameter Rc1/4
Air inlet diameter φ6
ME-001 Pump for 1kg can
ME-001 Pump for 1kg can
Dimension
: W255mm×D210mm×H345mm
(H495mm : when removing and attaching the can)
Weight
: 6.5kg
Applicable can size
: Outer diameterφ112mm×Height142mm
External view
ME-003 / 004 Pump for 3-4kg can
ME-003 / 004 Pump for 3-4kg can
Dimension
: W285mm×D270mm×H420mm
(H650mm : when removing and attaching the can)
Weight
: 8.0kg
Applicable can size
: ME-003=Outer diameterφ156mm×Height172mm
ME-004=Outer diameterφ162mm×Height210mm
External view
ME-018SF Pump for Pail can
ME-018SF Pump for Pail can
Dimension
: W475mm×D325mm×H570mm
(H970mm : when removing and attaching the can)
Weight
: 25.0kg
Applicable can size
: Outer diameterφ298mm×Height362mm
External view

High pressure pump for cartridge

CX-600-III Mini-X for cartridge
CX-600-III Mini-X for cartridge
Dimension
: W239mm×D200mm×H594mm
Weight
: 6.0kg
Applicable can size
: Outer diameterφ50mm×Height220mm
External view
CX-602-II Mini-X for double cartridges
CX-602-II Mini-X for double cartridges
Dimension
: W324mm×D200mm×H594mm
Weight
: 13.0kg
Applicable can size
: Outer diameterφ50mm×Height220mm
External view

Pale pump / drum pump series

– Pump operation sound is very quiet
– The flat follow plate is used so that the material can be used up to the end.
– Expanding / contracting seal wiper is equipped with can, so can replacement is easy (except for IP-035-30)
– No material leakage due to high durability structure, overhaul frequency is also reduced

Pale pump series

YP075 YP073 IP-035-30
pressure ratio 50×1 30×1 30×1
Discharge rate 70cc/cycle 70cc/cycle 35cc/cycle
Max discharge pressure 30MPa(FKM packing specification 21MPa) 18MPa 12MPa
Maximum discharge volume 1.4L/min 1.4L/min 7L/min
Air consumption 20L/cycle 12L/cycle 12L/cycle
Driving source Supply air pressure 0.2MPa or higher + AC100V or DC24V
YP075 / YP073 Pale Pump (New release in 2019)
YP075 / YP073 Pale Pump (New release in 2019)

Developed the world’s first expanding / contracting seal wiper for pail cans

Dimension
: W480mm×D400mm×H1141mm
(H1541mm : when removing and attaching the can)
Weight
: YP075 83.5kg / YP073 78.5kg
Applicable can size
: Outer diameterφ298mm×Height362mm
YP075 External viewYP073 External view
[ Expanding / contracting seal wiper can be selected. Pumping capacity 25% increase compared to conventional products ]
IP-035-30 Pale Pump
IP-035-30 Pale Pump
[ Compact Size ]
Dimension
: W475mm×D325mm×H765mm
(H1165mm : when removing and attaching the can)
Weight
: 50.0kg
Applicable can size
: Outer diameterφ298mm×Height362mm
External view

Drum pump series

YD075 YD073
pressure ratio 50×1 30×1
Discharge rate 70cc/cycle 70cc/cycle
Max discharge pressure 30MPa(FKM packing specification 21MPa) 18MPa
Maximum discharge volume 1.4L/min 1.4L/min
Air consumption 20L/cycle 12L/cycle
Driving source Supply air pressure 0.2MPa or higher + AC100V or DC24V
YP075 / YP073 Drum Pump (New release in 2019)
YD075 / YD073 Drum Pump (New release in 2019)
Dimension
: W914mm×D610mm×H1400mm
(H2400mm : when removing and attaching the can)
Weight
: YD075 180kg / YD073 175kg
Applicable can size
: Inner diameterφ566mm × Height890mm

 

[ Expanding / contracting seal wiper can be selected. Pumping capacity 25% increase compared to conventional products ]
YD075 External viewYD073 External view

Gun, Valve, Filter

Manual gun

PCN-201 Pencil Gun
PCN-201 Pencil Gun

The material is discharged when the lever is grasped.

Dimension
: φ16mm×L150mm
Weight
: 105g
Maximum Operating Pressure
: 4MPa
Operation method
: Manual (lever operation)
External view
PCN-211 Pencil gun with slender nozzle
PCN-211 Pencil gun with slender nozzle

Especially suitable for injection into work details.

Dimension
: φ16mm×L220mm
Weight
: 105g
Maximum Operating Pressure
: 4MPa
Operation method
: Manual (lever operation)
External view
NG-207 Flow Gun
NG-207 Flow Gun

High pressure resistant manual gun.

Dimension
: L230mm
Weight
: 520g
Maximum Operating Pressure
: 15MPa
Operation method
: Manual (lever operation)
External view

Automatic gun

PC-604 AC PENSER GUN
PC-604 AC PENSER GUN

A small automatic gun suitable for handheld or robotic handling

Dimension
: φ28mm×L135mm
Weight
: 180g
Maximum Operating Pressure
: 4MPa
Operation method
: Air (0.3MPa or more)
External view
V-048 Suck Back Gun
V-048 Suck Back Gun

This valve eliminates the that occurs when applying adhesive or silicone. Seal material can be selected from NBR and Teflon.

Dimension
: φ28mm×L125mm
Weight
: 260g
Maximum Operating Pressure
: NBR 8MPa / 15MPa for Tefron
Operation method
: Air (0.3MPa or more)
External view
V-056 Suck Back Gun
V-056 Suck Back Gun

This valve eliminates for small amount application. Seal material can be selected from NBR and Teflon.

Dimension
: φ25mm×L105mm
Weight
: 220g
Maximum Operating Pressure
: NBR 8MPa / 15MPa for Tefron
Operation method
: Air (0.3MPa or more)
External view
V-057 Suck Back Gun (Silicone Type)
V-057 Suck Back Gun (Silicone Type)

This valve eliminates for moisture absorption curing type silicone (RTV). Seal material can be selected from NBR and Teflon.

Dimension
: φ28mm×L140mm
Weight
: 320g
Maximum Operating Pressure
: NBR 8MPa / 15MPa for Tefron
Operation method
: Air (0.3MPa or more)
External view
V-062 High Durability Suck Back Gun
V-062 High Durability Suck Back Gun

Ideal for wear-resistant materials. Designed to prevent liquid leakage due to packing wear. Seal material can be selected from NBR and Teflon.

Dimension
: φ28mm×L125mm
Weight
: 300g
Maximum Operating Pressure
: NBR 8MPa / 15MPa for Tefron
Operation method
: Air (0.3MPa or more)
External view

定量バルブ

V-055 Volumetric metering valve
V-055 Volumetric metering valve

Since the material is discharged by volumetric metering, it can always be dispensed quantitatively regardless of change of viscosity.
By using an auto switch, replenishment and discharge can be confirmed. The plunger is designed to return to its original position by the material pressure, preventing miss shots.

Dimension
: W57mm×D116mm×H226mm
Weight
: 1.7kg
Maximum Operating Pressure
: 12MPa
Operation method
: Air (0.3MPa or more)
V-055-1 External viewV-055-2 External view
Format Maximum discharge volume(cc) Plunger diameter(mm)
Cross section
Discharge pressure ratio Switching pressure ratio Stroke(mm)
V-055-1-075 MAX0.77 φ6.3(0.31) 40×1 40×1 25
V-055-1-125 MAX1.25 φ8(0.50) 25×1
V-055-1-300 MAX3.0 φ12.5(1.23) 10×1
V-055-2-350 MAX3.5 φ12.5(1.23) 16×1 30
V-055-2-500 MAX5.3 φ15(1.77) 11×1
V-055-2-900 MAX9.4 φ20(3.14) 6×1
GC-24 micro amount metering valve micro measure
GC-24 micro amount metering valve micro measure

Precisely weigh and dispense a small amount. Use a micrometer to adjust the discharge rate. By using an auto switch, replenishment and discharge can be confirmed.

Dimension
: W40mm×D112mm×H236mm
Weight
: 850g
Maximum Operating Pressure
: 7MPa
Operation method
: Air (0.3MPa or more)
External view
Format Maximum discharge volume(cc) Plunger diameter(mm) Discharge pressure ratio Switching pressure ratio Stroke(mm)
GC-24-U3 MAX0.09 φ3 44×1 26×1 13
GC-24-U4 MAX0.16 φ4 25×1
GC-24-U5 MAX0.25 φ5 16×1
GC-24-U6 MAX0.36 φ6 11×1
GC-24-U6.3 MAX0.40 φ6.3 11×1
GC-57 Small Metering Valve SP Major
GC-57 Small Metering Valve SP Major

Lightweight and compact design makes installation easy. Suitable for hand-held work. By using an auto switch, replenishment and discharge can be confirmed.

Dimension
: φ28mm×L140mm
Weight
: 350g
Maximum Operating Pressure
: 5MPa
Operation method
: Air (0.3MPa or more)
Discharge pressure ratio
: 8×1
Discharge rate
: 0.1cc~0.5cc
External view
Constant flow discharge system Revolex
Constant flow discharge system Revolex

Discharges high-viscosity materials such as grease and silicon at a constant flow rate without pulsation. The flow rate can be set freely. Dispensing while metering allows high-precision applications. A two-liquid metering type is also available.

[ Proven examples ] Engine gasket drawing application / High-viscosity silicon high-precision filling of DVD / CD dampers / Steering and ball screw filling with grease constant flow / High-precision constant flow filling into molding machine

Gun, Valve, Filter

Filter

Used to prevent damage to valves and weighing machines. It is also ideal for preventing foreign matter from entering the product.

PF-514 High pressure filter
PF-514 High pressure filter
Dimension
: φ122mm×H247mm
Weight
: 10kg
Maximum Operating Pressure
: 12MPa
Port size
: Rc 1
Standard element
: 60#
External view
PF-414 Low pressure filter
PF-414 Low pressure filter
Dimension
: φ100mm×H204mm
Weight
: 2.3kg
Maximum Operating Pressure
: 2.5MPa
Port size
: Rc 3/4
Standard element
: 50# / 100#
External view
PF-324 mini filter
PF-324 mini filter
Dimension
: φ60mm×H135mm
Weight
: 1.7kg
Maximum Operating Pressure
: 20MPa
Port size
: Rc 3/8
Standard element
: 60# / 100#
External view

Pressure reducing valve

Pressure reducing valve for high viscosity fluids such as grease, silicone, adhesive, LIM materials. Ideal for stabilizing the central lubrication system and adjusting pressure fluctuations.

PPR0332M 減圧弁
PPR0332M Pressure Reducing Valve
Dimension
: W41mm×D39mm×H105mm
Weight
: 680g
Maximum Operating Pressure
: 21MPa
Pressure Adjustment Range
: 2〜15MPa
Port size
: IN side Rc 3/8 / OUT side Rc 1/4
External view
ページ上部へ

COMPANY

Head Office

3-13-6 Nishi-Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan
TEL +81-3-3493-2037 (main)
FAX +81-3-3493-2086

Fuji Technical Center

8532-314, Narusawa-mura, Minamitsuru-gun, Yamanashi Prefecture 401-0320, Japan
TEL +81-555-85-3777 (main)
FAX +81-555-85-3788

CONTACT

+81-3-3493-2037

8:45~17:30
(Closed on Weekends and National Holidays & during New Year's holiday)

Web inquiry / quotation